About Various and New

TRAILER EDGE PROTECTION SYSTEM (TEPS)

The Flat Bed Trailer Edge Protection System (TEPS) is designed to fit and lock between a wide range of truck trailer combs and tie down rails, the design accommodates the vertical movement in a trailer as it is loaded and unloaded.

Each panel is 3.0m long and 2.5m high and with a weight of approximately 15kg which allows the unit to be easily picked up by 2 operators and positioned next to the trailer or on smooth floor surfaces like warehouses, wheeled over to the truck and locked into position. The system when not in use can be nestled within each other as to not utilise high levels of floor space.

The system has a primary locking system utilising lockable castors with the secondary attachment onto the combing rail of the truck.  The vertical lug has the ability to travel a certain distance to suit different heights of trailers.  Combing rails sit at different levels which is dependent on the weight of the load and on the truck specifications.  

The product meets the performance requirements of relevant sections contained within Australian Standard AS/NZS1576, AS/NZS1664 & AS/NZS1665.  A letter of certification can be provided from the manufacturer.

The Flat Bed Trailer Edge Protection System (TEPS) is designed to fit and lock between a wide range of truck trailer combs and tie down rails, the design accommodates the vertical movement in a trailer as it is loaded and unloaded.

Each panel is 3.0m long and 2.5m high and with a weight of approximately 15kg which allows the unit to be easily picked up by 2 operators and positioned next to the trailer or on smooth floor surfaces like warehouses, wheeled over to the truck and locked into position. The system when not in use can be nestled within each other as to not utilise high levels of floor space.

The system has a primary locking system utilising lockable castors with the secondary attachment onto the combing rail of the truck.  The vertical lug has the ability to travel a certain distance to suit different heights of trailers.  Combing rails sit at different levels which is dependent on the weight of the load and on the truck specifications.  

The product meets the performance requirements of relevant sections contained within Australian Standard AS/NZS1576, AS/NZS1664 & AS/NZS1665.  A letter of certification can be provided from the manufacturer.  Click here to view the brochure

 

TRAILER MINI EDGE PROTECTION SYSTEM (TMEPS)

The Flat Bed Trailer Mini Edge Protection System (TMEPS) is designed to fit and lock between a wide range of truck trailer combs and tie down rails, the design allows for quick and easy fitting to allow the operator safety when accessing the back of the trucks.

Each panel is 2.0m long and 1.3m high and with a weight of approx. 9kg which allows the unit to be easily picked up by 1 operator and positioned into place. The TMEPS is compliant with relevant Australian Standards as an approved barricade.

The product meets the performance requirements of relevant sections contained within Australian Standards AS/NZS1576, AS/NZS1664 & AS/NZS1665 ~ Letter of certification provided from the manufacturer.

Click here to view the brochure.

 

 After two years of searching for a suitable solution to eliminate the risk of an induced current electric shock to personnel working at the locomotive maintenance sheds, David Armstrong, Maintenance Manager at the Callemondah Depot Gladstone, sought the services of Safe Option Solutions in conjunction with BLH Safety Solutions.

This photo shows the workshop with the aluminium handrails insitu.  The holistic approach of offering non-conductive hand railing, in conjunction with dropped object prevention has now allowed Aurizon to offer a high level of protection to their workforce in the electric services maintenance workshop.  The issue was the possibility of induced current from the 25000 volt locomotive power created on the existing aluminium handrail system.   The new non-conductive hand railing now eliminates this safety issue, with the addition of a new unique dropped object prevention system made completely of polymer, protecting the workforce from two major issues at the Aurizon Callemondah Depot in Gladstone.

Fabrication of the handrails was conducted on site in Gladstone, which ensured critical measurements required, were adhered to.  Dave expressed that he was very impressed by the professionalism of the whole project which offered a very favourable safety outcome to Aurizon.   Safe Option Solutions and BLH Safety Solutions were pleased to offer this innovative, combined system and Dave Armstrong of Aurizon was delighted with the result and is currently reviewing their future requirements to eliminate other similar issues on their site.  To view the article click here.

         

Safe Option Solutions are able to provide a full range of Free-Standing Rail Systems, Mobile Access Stair Systems, Single Point Anchor Systems, Mobile A-Frames & Access Stair Systems.  Click to check out the Height Safety Structures brochure.  Email us at solutions@safeoptionsolutions.com.au if you have any questions.

 

 

Safe Option Solutions are always on the lookout for new and interesting products and services that may be of interest.  We have noted below some that are new and relatively new to the market that we thought we would put into this category alone.  These include the new Rock Exotica range of pulleys, Rock Exotica Wire Eye Karabiners, PAL-Right Kit, The WorkRight Lanyard and the Frillneck range of versatile hats.

Rock Exotica have a great range of Pulleys in single and  double models.  To view the Technical Data Sheet click here.   

 

 Have you seen the new range of Wire Eye Karabiners from Rock Exotica? To view our brochure on these new karabiners click here

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In conjunction with Mark Gommers of Right Training and PACI we have developed the new PAL-Right kit.  This is an edge management kit that is light weight and versatile.  To view the PAL-Right brochure click on the Photo above.  Mark has extensive experience in training rescue teams and is a firm believer that this new kit will revolutionise rescue teams' ability to manage rescue close to an edge.

• The PAL-Right is a fully self-contained lanyard system – all components fit conveniently inside one storage pouch.
• The PAL-Right  is worn on your hip, and the Purcell connector is attached to the front of your harness.
• You must carefully read and understand the user instructions before using your PAL-Right for the first time.
• The PAL-Right is intended for expert use only (eg by ERT rescue personnel and rope access technicians).
• The PAL-Right  is a specialised item of PPE (personal protective equipment).
• The PAL-Right consists of an integrated assembly of high quality components. Each component is manufactured to conform to specific international and local standards.
• The PAL-Right enables the user to have an anchor point up to 15m away from an edge or work position.

To view the brochure click here and to view the user instructions click here

Frillneck ~ Patented in over 25 countries, designed in Australia, the Frlllneck is the essential outdoor headwear.  From leisure activities to sport and work, the versatile Frillneck provides a high-level of protection from the sun and environment.  The range includes Polyester Cotton Lycra, Polyester Micromesh, 100% Cotton, Cowboy Hats, Baseball Caps and Cooling Products.  Suitable for toddlers to the Rock Climbler to the Worker on a mine site with the helmet.To view the brochure click here